205="This file requires that the listed DLL files can be found on the\ntarget computer. Marking a file will add it to your setup project -\nhowever, avoid to bloat your package by adding files everyone\nhas on his computer due to a typical Windows installation...!\nNote that unchecking a file will *not* remove it from your file list\nfor safety reasons."
5202="save these settings"
5203="cancel changes"
{ INI file properties }
351="Modify INI file(s):"
352="&OK"
353="&Cancel"
360="INI file root directory:"
362="subdirectory:"
364="INI file name:"
366="(INI directory must already exist)"
368="Add"
369="Delete"
370="Change"
371="additions:"
372="deletions:"
373="changes:"
374="to section"
375="from section"
376="in section"
377="&add to list"
378="(reg'd only)"
379="example: AppPath=C:\\data"
380="Click right mouse button to define changes."
385="example: AppPath"
5352="save these settings"
5353="cancel changes"
5361="Select the root of the directory where the INI file should be modified"
5363="Enter the subdirectory name of above directory where the INI file should be modified"
5365="enter the INI file name"
5367="enter your desired modifications here. Just click on the desired action and right-click with the mouse to define changes."
5380="enter an assigment to add. Example: "TempDir=C:\\data" will add this string to the selected section."
5381="enter a replacement for the left assignment. Example: "TempDir2=C:\\data2" will replace the left occurence with this one."
5382="enter the section in which to apply your definition"
5383="enter a value to delete. Example: "TempDir" will delete this value from the selected section."
5384="enter the assignment that should be replaced with the right one."
415="create self-extracting, single file distribution ZIP archive (.EXE)"
416="Dialog caption of self-extractor:"
417="Text file containing License information:"
418="Text file containing 'About' text:"
419="(missing files are marked red.)"
420="Icon for your package:"
421="Run Notepad.."
422="Select "About" text for your setup:"
423="Select License info text for your setup:"
424="Select name of distribution package:"
425="self-extracting archives (*.EXE)|*.EXE"
426="ZIP archives (*.ZIP)|*.ZIP"
427="Cabinet archives (*.CAB)|*.CAB"
438="Don't close status window until installation process has finished."
439="no "Install" and "Finish" prompts"
440="(only allowed with fixed\ndestination directories)"
441="make unrecognizable for other unpackers"
442="split file / disk-spanning"
443="Bytes per volume:"
445="hide "Info" button"
5402="Save these settings"
5403="Cancel changes"
5411="select the compression technique to use for this package"
5413="Just select your preferred language module which should be used for the self-extracting installer."
5414="check this option to use password encryption for this package"
5415="check this option to let INF-Tool create a self-extracting, single-EXE package"
5421="run Notepad to create a new file or edit an existing file"
5428="enter a filename for this package (without extension!)"
5429="enter the password you'd like to use for encryption"
5430="enter a short text line to display on the caption bar of the self-extractor"
5431="the name of the plain Text file containing license information for your program"
5432="the name of the plain Text file containing the "About" text that will show up in the Self-extractor's main window"
5433="the name of the Icon that will be used for the Setup program (leave empty to use default)"
5434="click to select a name for your package (or simply enter the desired name)"
5435="click to open a text file containing license information for your program"
5436="click to open a text file containing the "About" text that will show up in the Self-extractor's main window"
5437="click to open an icon file that will be used for the Setup program"
5438="if checked, the installation dialog will not close before Win9x/NT tells that all installation-related processes are completed"
5439="The self-extractor will execute prompt-less, without dialogs (as long as no errors occur)"
5442="check this option to split the package if it exceeds the defined size. Suggested if you want to offer safer downloading of if you have to distribute on floppy disks."
5444="select a pre-defined size for each part or enter another size in bytes."
5445="prevents INF-Tool copyright info and your name from being displayed by the self-extractor (it will still be stored in the EXE file, but hidden from the end-user)"
{ Registry additions }
451="Add the following key to the Registry:"
452="&Add"
453="&Cancel"
460="..at &Root-Key:"
461="Example: Software\\MegaSoft\\WorldMap"
462="Example: DefaultUser"
463="Example: Miller or 00,00,00,00,FF,01"
464="Note: Fields marked with a * are required for proper operation."
465="Values can only be saved after all required fields have been entered!"
466="Subkey: *"
467="Value Name:"
468="Flag:"
469="Value:"
471="User Dir. as in Step #3"
472="delete this registry key during installation"
473="delete this registry key during uninstallation"
5452="save these settings"
5453="cancel changes"
5460="select the Registry-Root in which your key should be added/changed"
5467="enter the name of the value you'd like to add or change"
5468="select one of 11 pre-defined flags (for Key types) that can be used in Registry entries (check the help file for more information)"
5469="Enter the value for your registry key (check the help file for more information). The format of this value depends on the flag (=type of key) you selected above."
5470="enter the subkey of the above selected Registry root key"
5472="if checked, the installation will delete this key during installation, if it exists (instead of installing it)"
5473="if checked, the installation will delete this key during uninstallation (default)"
{ Add Start Menu Group }
501="Add the following file to a Group:"
502="&Add"
503="&Cancel"
510="Group name:"
511="Icon/Link Title: *"
512="Starting command: *"
513="Starting directory:"
514="Subdirectory of the selected root where the application should start from:"
515="The command must start with the filename,\nparameters are optional. Case-sensitive!"
516="Example: MegaSoft or MegaSoft\\WorldMap (same as in Step #3)"
517="Note: Fields marked with a * are required for proper operation."
518="Not all required fields were entered!"
519="A link to this program will be directly placed to the\n"Programs" folder of the Startup group."
525="Select shortcut icon:"
527="create link in the personal section of Start menu"
528="add link in the "All Users" section of Start menu (NT)"
529="add this link for new users (NT)"
530="create link in personal section of the Start menu only"
5502="save these definitions"
5503="cancel changes"
5520="enter a name for the group to create (or select an already defined group from the list)"
5521="select which title to display for this program"
5522="select the name (and optional parameters) of the file that should be started"
5523="Select the starting directory for this command. The defined command will be executed in this directory when the user runs the application."
5524="this is the subdirectory of the root selected from above, from where the program will be executed"
5526="select the icon for the selected shortcut (will only work for "real" programs, not URLs or such)"
{ OCX Registration }
551=" Register OCX/DLL files"
552="&OK"
553="&Cancel"
561="Simply check the files you want to be registered."
562="(reg'd only)"
5552="save these settings"
5553="cancel changes"
5560="the checked files will be registered on the customer's PC during installation"
{ Flags for file copy }
601="Copy %s using the following modes:"
602="&OK"
603="&Cancel"
610="Warn if skipping"
611="No skipping after errors"
612="No version-check"
613="Force "file in use" behaviour"
614="No overwrite"
615="No version dialog"
616="Replace only"
617="When un-installing:"
618="include in File Un-install list"
619="Force "file in use" behaviour"
620="(reg'd only)"
621="copy files using the following modes:"
5602="save these settings"
5603="cancel changes"
5610="display a warning if the user tries to skip a file after an error has occurred"
5611="don't allow the user to skip copying the file after an error has occurred"
5612="ignore file versions and write over existing files in the destination directory"
5613="handle the file as if it was in use during the file copy operation (Windows will create a temporary filename, which will be renamed to the desired filename after a restart)"
5614="don't overwrite an existing file in the destination directory"
5615="don't overwrite a file in the destination directory if the existing file is newer than the source file, but don't show a warning dialog"
5616="copy the source file to the destination directory only if the file is already present in the destination directory"
5618="if you uncheck this option, this file will stay on the computer when the program is un-installed"
5619="if the file is in use when un-installing, queue the file to be deleted when the system is rebooted"
{ Add Destination directory }
651="Add the following destination directory:"
652="&Add"
653="&Cancel"
654="&Save"
660="Select the &root of the directory to create:"
661="Enter the &directory name to create under the selected root:"
662="Example: MegaSoft\\WorldMap"
663="(Caution: Win95/98 doesn't support Long File Names here)"
664="Each directory has to start with a pre-defined (logical) root directory.\nIn the 2nd edit field, you can define an individual directory starting\nfrom the selected root directory, in which to copy your files to."
667="Pre-configured destination path:"
668="User-defined destination path:"
669="Default:"
671="Sub-Directory:"
673="Prompt user with:"
675="Where would you like to install %s?"
676="Continuing will overwrite the existing version of %s on your computer. Please enter the desired directory."
677="Overwrite warning:"
5652="save your definitions"
5653="cancel changes"
5665="Select one of the pre-defined roots for your file (e.g., the boot directory). Afterwards, you can define a subdirectory for this root (e.g., "Program files")."
5666="if needed, enter a subdirectory of the root directory you defined above"
5667="check if you want the selected files to be copied to a fixed, pre-defined path"
5668="check if you want to allow the user to select a custom path for the selected files"
5670="here you can select a default root for the user-defined destination directory"
5672="here you can select a default subdirectory of the above root for the user-defined destination directory"
5674="enter a prompt to ask your user for the desired destination."
5678="enter a message that will warn your user about overwriting an existing version of this application"
{ Modify AUTOEXEC.BAT }
701="Modify the AUTOEXEC.BAT file:"
702="&OK"
703="&Cancel"
704="(registered version offers all options)"
710="Add to the path:"
711="Remove from path:"
712="Add command #1:"
713="Parameter(s):"
714="Add command #2:"
715="Delete command(s):"
716="(don't add an extension if you want to remove all lines with this command.) Example: KEYB"
717="Set Environment var:"
718="Remove Env.Variable:"
719="Set TEMP directory:"
720="Subdirectory of the directory above:"
5702="save these settings"
5703="cancel changes"
5721="Select the directory to add to the PATH= statement in Autoexec.bat. In the next field you can enter a subdirectory of it (e.g., if you need "<Boot-Dir>\MMyFiles")."
5722="Enter the subdirectory of the above directory to add to the PATH= statement in Autoexec.bat. Both will be combined. If the resulting path is not part of the PATH= line, it will be added."
5723="Select the directory to remove from the PATH= statement in Autoexec.bat. In the next field you can enter a subdirectory of it (e.g., if you need "<Boot-Dir>\MMyFiles")."
5724="Enter the subdirectory of the above directory to remove from the PATH= statement in Autoexec.bat. Both will be combined. If the result is part of the PATH= line, this part will be removed."
5725="select (or enter) the name of the file or command that should be started (e.g., "SET" or "MSCDEX.EXE")"
5726="enter parameters for the command defined at the left (e.g., "Language=eng" or "/D:MSCD000")"
5727="Every command defined here will be deleted from Autoexec.Bat. If you don't enter a extension, any command line with this file will be removed (e.g., KEYB.EXE and KEYB.COM)."
5728="enter the name of the environment variable to add to Autoexec.Bat (e.g., "UserDir")"
5729="enter the value to set for the Environment variable defined at the left (e.g., "c:\uusers\rrichey")"
5730="enter the name of the environment variable to remove from Autoexec.bat"
5731="Select the directory to define as TEMP directory in Autoexec.bat. In the next field you can enter a subdirectory of it (e.g., if you need "<Boot-Dir>\TTEMP")."
5732="Enter the subdirectory of above directory to set as TEMP directory in Autoexec.bat. Both will be combined."
{ Modify CONFIG.SYS }
750="Modify the CONFIG.SYS file:"
752="&OK"
753="&Cancel"
754="(registered version offers all options)"
760="Set FILES= to:"
761="Set BUFFERS= to:"
762=""
763="Set STACKS= to:"
764="Set FCBS= to:"
765="Add device driver #1:"
766="Add device driver #2:"
767="Parameters:"
768="Delete device driver:"
769="Delete key(s):"
770="Just enter the modifications you'd like to apply to CONFIG.SYS.\nNote that this feature will only work under Windows 95/98."
5752="save these settings"
5753="cancel changes"
5771="enter the number of FILES to set in Config.sys"
5772="enter the number of BUFFERS to set in Config.sys"
5773="enter the char of LASTDRIVE to set in Config.sys"
5774="enter the value(s) for STACKS to set in Config.sys"
5775="enter the value(s) for FCBS to set in Config.sys"
5776="enter the code(s) for the COUNTRY= statement in Config.sys"
5777="enter the value for the DOS= statement in Config.sys (e.g., "HIGH,UMB,NOAUTO")"
5778="enter the value for the SHELL= statement in Config.sys"
5779="select the name of the Device driver of your package to add to Config.sys (e.g., MULTICD.SYS)"
5780="select the parameter(s) for the Device driver defined at the left (e.g., "/Multi=1 /IRQ=15")"
5781="enter the name(s) of the device drivers to remove from Config.sys (e.g., "Display.sys")"
5782="select the name of the Config.sys statements to delete"
6188="enter a message to warn users if they want to remove your program"
6189="enter a message that will pop up after a successful un-installation of your program"
6194="enter a message requesting the user to confirm that he/she wants to install your program (leave this field empty to prevent this message)"
6196="enter a message that will pop up after a successful installation of your program (leave this field empty to prevent this message)"
6197="if checked, INF-Tool will add a shortcut to the Start menu for uninstalling your program."
1210="╪απ 8: ─Φ±≥≡Φß≤≥ΦΓ"
1211=" ╤ετΣα≥ⁿ εß≡ατ ΣΦ±≥≡Φß≤≥ΦΓα Γ Ωα≥αδεπσ: "
1214="╤ετΣα≥ⁿ Ωα≥αδεπ!"
1215=" create a distribution package: "
1216="Name:"
1217="Options.."
1218="Generate package NOW!"
1219="Execute command(s) after the installation:"
1220="define actions .."
1222="<click to edit..>"
6214="creates a directory and populates it with all the files you need for building your installation diskette"
6217="set special options like SFX packages, name of your package and more..."
6218="starts generating the distribution package"
6221="please enter the name of the directory INF-Tool should create for storing the required files"
1240="Options"
1241="create .&BAK files *"
1242="display information and warnings"
1243="Win'98 style buttons"
1244="display Intro Screen *"
1245="open .INF's with INF-Tool"
1246="repair INF functionality"
1247="I have trouble adding files (e.g., PIF files)"
1248="Default flag for file copy operations:"
1249="Options for this project only:"
1250=" After setup... \nNo action\nReboot PC\nRestart Windows"
1251="add AdvPack files to package (if required)"
1252="Sa&ve INF-Tool's configuration"
1253="Preferred language:"
1254="Configuration saved.\nSome changes might require a new start of INF-Tool to show up."
1255="Please restart INF-Tool to apply the language change.\nIf you encounter display problems, please check the help file."
1257="always clean up distribution directory"
1258="add MS's registry-repair code to project"
1259="require Administrator rights for install"
1260="disable hints"
1261="check for new version"
6241="create .BAK files for safety"
6242="display a message when a new .INF script was created"
6243="if you like Win98's "bells and whistles", then check this option ;-)"
6244="show the INF-Tool information screen at startup"
6245="open .INF files by INF-Tool when double-clicking (edit will only be possible when the script was designed by INF-Tool)"
6246="if your .INF scripts can't be installed by right-clicking your mouse and selecting "Install", try to check this option and click "Save configuration""
6247="Some users had trouble when trying to add MS-DOS mode .PIF files or others to the file list in Step #2. By checking this option, you can work around this problem."
6250="Which action should Win9x/NT take after processing the installation script?"
6251="if checked, the script will add AdvPack.dll, W95Inf16.dll and W95Inf32.dll to your distribution package if you defined Un-install dialogs"
6252="save INF-Tool's settings now"
6255="(see Tips && Tricks help file for more information)"
6256="select your preferred language, click "Save" and restart INF-Tool to apply display changes"
6257="if checked, INF-Tool will delete all files from your distribution directory before rebuilding it"
6258="if checked, INF-Tool will add a few switches which will repair commonly-damaged parts of the registry"
6259="this will add code to check if the user has permissions to install programs"
6260="don't show popup hints"
6261="if an Internet-connection is active, INF-Tool will check if a newer version is available"
;666274="Are you online? This button can take you directly to the Ordering Network registration site (which is a VERISIGN (r) authentic site and supports maximum browser security)."
{ 5000..7000 : Hint texts }
{ are calculated: ID+5000 }
{ IMPORTANT NOTE: Hint texts are CUT after more than 1 space (blank) !}
10016="You shouldn't add the INF script manually -\nINF-Tool will do this automatically for you!\n\nIt's suggested that you remove the INF script from the list."
10018="Windows NT only supports "reboot", INF-Tool will reflect that in the INF script."
10019="Error #%d opening %s!"
10020="One or more file(s) couldn't be opened!\nPlease check your distribution options and if any other setup programs are running in the background."
10021="INF-Tool successfully built your distribution package!\nCompressed %8.0n to %8.0n Bytes (= %n %%)."
10022="Please select a group first!"
10023="%s not found!"
10024="One or more files for this project couldn't be found.\nThese files are marked RED in the file list of Step #2.\nPlease note that a working script can only be created\nif INF-Tool can locate and copy these files."
10025="Error building package."
10026="Please define the name of the Storage directory first."
10027="%d file(s) copied to %s.\n\nThese files can be distributed and installed:\n1) via the SETUP utility\n2) via the "Software" applet of Windows' Control Panel\n3) by right-clicking the INF file with the mouse and selecting "Install..".\n\nYou can also use this directory for testing or other purposes."
;10028=""
10029="Please let INF-Tool generate a Distribution disk directory first!"
10030="Error executing %s!"
10031="Please check the help file for more information."
10032="<Name of your program>"
10033="%s is locked or could not be opened -\nINF-Tool had to assign an incorrect Filesize for this file."
10034="Your installation options require the AdvPack files,\nbut your package will not contain them.\nTo be safe, you could check the option "Add AdvPack Files"\n(see Help files for more information)."
10037="There might be problems registering files with long file names."
10038="Using long file names containing spaces can cause problems when using parameters. In this case, please carefully test the functionality of your setup before distribution."
10039="If you want to use commas in your prompt, please enclose them between quotes to prevent display problems."
10040="Hard-coded destination directories like you just entered it are not supported by Windows 95/98.\nPlease select one of the pre-configured root directories from the list and enter a subdirectory of your choice as destination for your files."
10041="The registered version also offers creation of shortcuts in System areas like the Desktop, the "Programs" menu, the "SendTo" menu, the "Autostart" menu and others!"
10042="Your defined prompts are too long and had to be truncated by a total of %d chars."
10043="Sorry, this feature is only supported by the registered version of INF-Tool."
10044="This is not a valid AutoRun definition.\nThe program should not contain a drive letter, since it will be run from a CDROM, for which you can't know the drive letter yet."
10045="You should only enter executables (.EXE) for safety reasons."
10046="Import a registry file"
10047=".REG registry files|*.reg"
10048="This is not a valid registry (.REG) file.\nRegistry files can easily be created by entering Regedit.exe, clicking a section of your registry and selecting "Registry"-"Export registry file" from the menu."
10049="Step #3: %s has no matching entry in the left list !\nPlease carefully check for different spellings of this filename since this could cause setup problems !"
10050="You have mixed up language settings. Sorry, but you have to completely redefine these settings or reactivate the previous language setting for this project."
10051="Start Menu"
10052="Programs"
10053="Program files"
10054="Uninstall %s"
10055="Sorry, but %s was not created by INF-Tool.\n\nOpening and reading standard INF script files is scheduled for an upcoming version of INF-Tool."
10056="Please select a valid language for the self-extractor."
10057="Each volume size must be at least 65kb (65535 Bytes) - size will be adjusted."
10058="Splitting was not required for this package."
10059="Could not create %s - new icon couldn't be applied."
10060="Sorry, but this INF script can't be analyzed successfully..\nIf you are a registered user, please send it to me as described in the helpfile -\nI'll see what I can do. ;-)"
10061="This INF file is missing basic sections and/or header signatures and can't be analyzed successfully."
10062="Potential problem: could not find %s section."
10063="Step #1: please enter an INF filename for this project first."
10064="Missing file(s) - alternate icon can't be applied.\nPlease check your project configuration."
10065="Couldn't retrieve Icon ID's of self-extracting module: please reinstall INF-Tool."
10066="Error applying alternate icon. Please check your project configuration."
10067="Desktop"
10068="Commands before Setup are just supported\nwhen using user-defined destination directories!"
10069="Commands before Uninstallation are just supported\nwhen using user-defined destination directories!"
10070="In this version, "quiet" calls are applied to both of the defined commands!"
10073="Sorting the list will reset all defined file copy flags to the default value.\n\nDo you like to proceed?"
10074="Re-ordering this list may produce incorrect results at your Shortcut definitions.\nIf you change the default order, don't forget to test your installation carefully before deployment."
10075="Unchecking this option will clear all related prompts. Are you sure?"